Wet Glaze Refine - Advanced Finishing Polish

Wet Glaze Refine – Advanced Finishing Polish

When maximum clarity and gloss matter, Wet Glaze Refine delivers. Engineered with diminishing abrasives, this advanced formula provides a long working time for controlled correction and the ability to jewel paint to a mirror-like finish.

Refine removes light to moderate scratches, swirls, and holograms, restoring depth and brilliance while leaving behind a crisp, defect-free surface. With no fillers, Refine delivers true correction instead of masking, ensuring results that last. As a pad dependent polish, it adapts to your needs — from moderate defect removal with a polishing pad to ultra-refinement with a soft finishing pad.

Whether you’re finishing after heavy correction or enhancing well-maintained paint, Refine is your go-to solution for achieving professional, high-gloss results.

Key Benefits

• Advanced Finishing Polish – Refines paint to extreme clarity and gloss.

• Diminishing Abrasives – Smoothly break down for refined correction and a flawless finish.

• Long Working Time – Offers precision and control for fine-tuning paint.

• No Fillers – Provides true correction that lasts, without masking defects.

• Pad Dependent – Versatile performance; jewel to a flawless finish with finishing pads.

• Removes Light to Moderate Defects – Eliminates scratches, swirls, and holograms.

• Professional Results – Leaves paint ready for sealant, wax, or ceramic protection.

• Made in the USA

16oz 

How To Use – Wet Glaze Refine 

1. Preparation

• Wash and dry vehicle. Clay if needed.

• Tape off trim and edges.

2. Pad Selection

• Excellent with Microfiber pads: We recommend Buff & Shine Uro-Fiber.

• Excellent with traditional foam pads: Finishing foam for jeweling to a high-gloss finish.

• Pad aggression levels - Polishing pads up to finishing pads recommended.

3. Machine Setup

• Works with DA, forced rotation DA, and rotary polisher.

• Apply 3–4 pea-sized drops. Always prime a fresh pad.

• Spread product evenly before starting.

4. Working the Polish

• Refine uses diminishing abrasives.

• Longer working time – polish until abrasives fully break down.

• Use light pressure on final passes for maximum clarity.
  

5. Wipe & Inspect

• Wipe with clean microfiber towel.

• Inspect under bright lighting.

• Repeat if needed.

6. Protect

• Finish with your preferred wax, sealant, or coating.

• Admire your work. 

Available September 2025